AboutProductsMediaContact

UL/FM Listed Clevis Hanger

The workhorse hanger for suspended steel and plastic piping. MSS SP-58 and SP-69 Type 1 construction with UL listed and FM approved options for regulated fire protection scopes in Kuwait.

Pipe sizeDN15-7501/2" to 30" NPS
ApprovalsUL/FMListed options
Rated load9,400 kgMax capacity
TEMBO UL/FM listed clevis hanger

Built for long suspended runs.

A clevis hanger carries the pipe in a shaped mild-steel strap suspended from a yoke and cross bolt, so the piping can be levelled from the hanger rod after installation. The lower nut sets the elevation and the locked upper nut keeps the assembly from loosening under vibration, which is why consultants specify this type for long suspended runs of chilled water, domestic water, and sprinkler piping.

Combined Cooperation stocks the TEMBO TGCH00 series in Kuwait across the full range from DN15 (1/2") to DN750 (30"). The electro-galvanized UL listed and FM approved variants cover fire protection packages reviewed against NFPA 13, while plain, hot-dip galvanized, zinc flake, and epoxy coated finishes handle plumbing, HVAC, and exposed or coastal installations.

The 15-degree swing tolerance in either direction lets pipe feed through during erection without pinching, and the aligned bolt holes speed up overhead installation on site.

UL & FM listed options
15° swing tolerance
High load capacity
Corrosion resistant finishes
Design standardANSI/MSS SP-58 & SP-69 (Type 1)
Federal specificationWW-H-171E & A-A-1192A (Type 1)
ApprovalsUL listed / FM approved options
MaterialMild steel (other materials on request)
Maximum temperature343 C (650 F)
FinishesElectro-galvanized (UL/FM), plain, hot-dip galvanized, zinc flake, epoxy coated
Size rangeDN15 to DN750 (1/2" to 30")
Hanger rod sizesM10 to M30

Selected sizes and rated loads

Pipe sizePipe OD (mm)Height (mm)Rod sizeMax load (kg)
DN15 (1/2")21.368M10350
DN25 (1")33.476M10350
DN50 (2")60.3114M10350
DN80 (3")88.9165M12780
DN100 (4")114.3202M12780
DN150 (6")168.3278M121,250
DN200 (8")219.1338M122,100
DN300 (12")323.8490M162,100
DN600 (24")609.6850M309,400

Intermediate sizes up to DN750 are available. Full dimensional data is in the TEMBO datasheet below.

Request pricing

Request a quote for ul/fm listed clevis hanger.

Send the BOQ, support schedule, or consultant specification and our technical team will come back with selections, compliance notes, and indicative pricing.